High-temperature shear zone formation in Carrara marble: The effect of loading conditions

This is a Preprint and has not been peer reviewed. This is version 3 of this Preprint.


Download Preprint

Supplementary Files

Livia Nardini, Erik Rybacki, Maximilian Jacob Enzo Amandus Döhmann, Luiz F. G. Morales, Sascha Brune, Georg Dresen


Rock deformation at depths in the Earth’s crust is often localized in high temperature shear zones occurring at different scales in a variety of lithologies. The presence of material heterogeneities is known to trigger shear zone development, but the mechanisms controlling initiation and evolution of localization are not fully understood.
To investigate the effect of loading conditions on shear zone nucleation along heterogeneities, we performed torsion experiments under constant twist rate (CTR) and constant torque (CT) conditions in a Paterson-type deformation apparatus. The sample assemblage consisted of cylindrical Carrara marble specimens containing a thin plate of Solnhofen limestone perpendicular to the cylinder’s longitudinal axis. Under experimental conditions (900 °C, 400 MPa confining pressure), samples were plastically deformed and limestone is about 9 times weaker than marble, acting as a weak inclusion in a strong matrix. CTR experiments were performed at maximum bulk shear strain rates of ~ 2*10-4 s-1, yielding peak shear stresses of ~ 20 MPa. CT tests were conducted at shear stresses of ~ 20 MPa resulting in bulk shear strain rates of 1-4*10-4 s-1. Experiments were terminated at maximum bulk shear strains of ~ 0.3 and 1.0.
Strain was localized within the Carrara marble in front of the inclusion in an area of strongly deformed grains and intense grain size reduction. Locally, evidences for coexisting brittle deformation are also observed regardless of the imposed loading conditions. The local shear strain at the inclusion tip is up to 30 times higher than the strain in the adjacent host rock, rapidly dropping to 5 times higher at larger distance from the inclusion. At both investigated bulk strains, the evolution of microstructural and textural parameters is independent of loading conditions. Our results suggest that loading conditions do not significantly affect material heterogeneity-induced strain localization during its nucleation and transient stages.




Earth Sciences, Geology, Geophysics and Seismology, Physical Sciences and Mathematics, Tectonics and Structure


localization, Shear zones, marble, loading conditions, torsion


Published: 2018-09-26 10:20

Older Versions

CC BY Attribution 4.0 International

Add a Comment

You must log in to post a comment.


There are no comments or no comments have been made public for this article.