Using nano-XRM and high-contrast imaging to inform micro-porosity permeability during Stokes-Brinkman single and two-phase flow simulations on micro-CT images

This is a Preprint and has not been peer reviewed. The published version of this Preprint is available: https://doi.org/10.3389/frwa.2022.935035. This is version 2 of this Preprint.

Add a Comment

You must log in to post a comment.


Comments

There are no comments or no comments have been made public for this article.

Downloads

Download Preprint

Authors

Hannah Menke, Ying Gao, Sven Linden, Matthew Andrew

Abstract

Carbonate rocks have particularly complex and multiscale pore systems which are weakly understood. In this study we use combined experimental, modelling, and pore space generation methods to tackle the impact of micro-porosity on the bulk flow properties of Estaillades limestone. First, a nano-core from a microporous grain of Estaillades Limestone was scanned using x-ray nano tomography (nano-XRM). The information from the nano-XRM scan was then used as input into an object-based pore network generator, on which permeability fields were simulated for a range of porosities, creating a synthetic Kozeny-Carman porosity-permeability relationship targeted for the specific micro porous system present in Estaillades. We found a good match between experimental and simulated Mercury Intrusion Capillary Pressure (MICP) range in the imaged geometry and a good match between the imaged and object generated permeabilities and MICP. A micro-core of Estaillades was then scanned using x-ray microtomography (μCT), the differential pressure was measured during single phase flow, and the rock was flooded with highly doped brine to differentiate connected from unconnected micro-porosity. The differential contrast between the dry and doped images was used to assign a porosity to each voxel of connected micro-porosity. The flow through the pore space was then solved using a Stokes-Brinkman solver while a second segmented image with no micro-porosity was solved a Stokes solver. The differences between the measured permeability and the two computed permeabilities was evaluated. We found that there was good agreement between both the computed permeability of the Stokes and Stokes-Brinkman simulation with the measured permeability. However, there was considerable differences in the velocity fields with the Stokes-Brinkman simulation capturing stagnant regions of the pore space that were not present in the Stokes simulations. Additionally, we investigated the implications of including micro-porosity in estimations of relative permeability. Nitrogen was experimentally co-injected through the core with doped brine at a 50% fractional flow and imaged to the two-phase effective permeability. This experimental measurement was compared with the numerical permeability simulated using both Stokes and Stokes-Brinkman models for several saturation points along a synthetic MICP injection curve. We found that the Stokes simulation was not able to predict relative permeability with this method due to the major flow paths in the macro-porosity being impeded by the injected non-wetting phase. The Stokes-Brinkman simulations, however, allowed flow in the microporous regions around these blocked flow paths and was able to achieve a relative permeability prediction that was a reasonable match to the experimental measurement. This method could be used to predict relative permeability in water wet pore-structures with high micro-porosity.

DOI

https://doi.org/10.31223/osf.io/ubg6p

Subjects

Civil and Environmental Engineering, Earth Sciences, Engineering, Hydrology, Physical Sciences and Mathematics

Keywords

X-ray tomography, carbonate microporosity, Kozeny-Carman, multiscale imaging, permeability, pore morphology, relative permeability, steady state flow, synthetic pore-space generation

Dates

Published: 2019-05-17 12:16

Older Versions
License

CC BY Attribution 4.0 International