Preprints
Filtering by Subject: Mining Engineering
Practical guidelines for DFIT interpretation using the ‘compliance method’ procedure from URTeC-2019-123
Published: 2024-10-06
Subjects: Mining Engineering
This article provides practical tips for interpreting Diagnostic Fracture Injection Tests (DFITs) using the ‘compliance method’ procedure initially developed by McClure et al. (2016) and refined in the paper URTeC-2019-123, which summarized results from a joint industry study (McClure et al., 2019). The results from McClure et al. (2016) demonstrated that common practices for stress estimation [...]
Multicomponent and multiphase CO2-brine system in microfluidic characterised in situ by Raman spectroscopy
Published: 2024-06-07
Subjects: Chemical Engineering, Complex Fluids, Mining Engineering, Petroleum Engineering
Deep-saline aquifers could be instrumental in the geological storage of carbon dioxide due to their relatively good reservoir properties, high volume, and prevalence. However, there are a few difficulties which should be overcome to obtain effective stores in such reservoirs. Most problems are related to formation damage caused by salt precipitation. Due to the complexity of such systems, it is [...]
Fluid inclusions technique for porphyry deposit exploration: The Rosario porphyry Cu-Mo deposit
Published: 2023-05-16
Subjects: Mining Engineering
Porphyry ore deposits are the largest source of copper, molybdenum, gold, and silver in the world. Various exploration techniques have been developed due to their importance as a source of metals. A special focus has been devoted to understanding the processes of hydrothermal fluids as mineralization drivers. Fluid inclusions provide direct information about the fluids involved in the [...]
Laboratory validation of a new hydro-mechanical energy-based brittleness index model for hydraulic fracturing
Published: 2022-12-01
Subjects: Civil and Environmental Engineering, Earth Sciences, Engineering, Engineering Science and Materials, Mining Engineering, Oil, Gas, and Energy, Petroleum Engineering
Brittleness Index (BI) is a critical parameter characterising the deformation regime of geo-materials, covering the range from purely brittle (fractures) to ductile (plastic flow). A variety of BI models have been developed based on rock properties such as mineralogy, elastic parameters, or stress-strain data. However, very few of them are based on the deformation induced by hydro-mechanical [...]
Inclination and heterogeneity of layered geological sequences influence dike-induced ground deformation
Published: 2022-05-31
Subjects: Earth Sciences, Engineering, Mining Engineering
Constraints on the amount and pattern of ground deformation induced by dike emplacement are important for assessing potential eruptions. The vast majority of ground deformation inversions made for volcano monitoring during volcanic unrest assume that dikes are emplaced in either an elastic-half space (a homogeneous crust) or a crust made of horizontal layers with different mechanical properties. [...]
CCC - integrated multiscale study of salt cavern abandonment in the Netherlands
Published: 2022-03-24
Subjects: Geology, Geophysics and Seismology, Materials Science and Engineering, Mineral Physics, Mining Engineering, Other Earth Sciences, Tectonics and Structure
The KEM-17 project of the Dutch State Supervision of Mines presented a critical review of concepts of cavern abandonment and related science. It recommended that analyses of cavern abandonment are done as an integrated project, addressing (i) micro-scale physical processes, (ii) cavern scale models based on field scale experiments and numerical models, (iii) the salt dome scale, to model the far [...]
Reducing the Uncertainty of Multi-Well Petrophysical Interpretation from Well Logs via Machine-Learning and Statistical Models
Published: 2022-03-22
Subjects: Analysis, Earth Sciences, Engineering, Geophysics and Seismology, Mining Engineering, Multivariate Analysis, Statistical Methodology, Statistical Models
Well-log interpretation provides in situ estimates of formation properties such as porosity, hydrocarbon pore volume, and permeability. Reservoir models based on well-log-derived formation properties deliver reserve-volume estimates, production forecasts, and help with decision making in reservoir development. However, due to measurement errors, variability of well logs due to multiple [...]
Subdivide and Conquer: Adapting Non-manifold Subdivision Surfaces to Surface-Based Representation and Reconstruction of Complex Geological Structures
Published: 2021-04-20
Subjects: Earth Sciences, Geology, Mining Engineering
Methods from the field of Computer Graphics are the foundation for the representation of geological structures in the form of geological models. However, as many of these methods have been developed for other types of applications, some of the requirements for the representation of geological features may not be considered and the capacities and limitations of different algorithms are not always [...]
Computing single-particle flotation kinetics using automated mineralogy data and machine learning
Published: 2020-08-20
Subjects: Earth Sciences, Engineering, Geology, Mining Engineering, Physical Sciences and Mathematics
Studies of flotation kinetics are essential for understanding, predicting, and optimizing the selective recovery of minerals and metals through flotation. Recently, much effort has been made to use intrinsic ore properties to model flotation behavior. Particle-based characterization methods, e.g. SEM-based image analysis, has enabled much of this development. However, currently available methods [...]
Formation Susceptibility to Wellbore Instability and Sand Production in the Hajdúszoboszló field, Pannonian Basin: Hungary
Published: 2020-07-06
Subjects: Engineering, Mining Engineering, Other Engineering
Wellbore instability and formation sand production pose potential risks for wellbore drilling, completion and production operations. In many sandstone reservoirs worldwide, sand production has been observed to accompany oil and gas production. In this study, we estimate, predict and quantify wellbore instability and sand production potentials in the Hajdúszoboszló field, Pannonian Basin, Hungary, [...]
Interferometric Processing of ScanSAR Data Using Stripmap Processor: New Insights from Coregistration
Published: 2020-04-14
Subjects: Aerospace Engineering, Civil and Environmental Engineering, Computer Engineering, Earth Sciences, Electrical and Computer Engineering, Engineering, Geology, Geophysics and Seismology, Glaciology, Hydrology, Mining Engineering, Other Earth Sciences, Physical Sciences and Mathematics, Tectonics and Structure, Volcanology
Processing scanning synthetic aperture radar (ScanSAR) data using a stripmap processor, which is called full-aperture processing, has been the choice of many researchers. ScanSAR data are known to require very high azimuth coregistration precision which is usually achieved by a geometrical coregistration followed by a spectral diversity coregistration on the ScanSAR burst. However, for [...]
Interferometry with ALOS-2 full-aperture ScanSAR data
Published: 2020-04-14
Subjects: Aerospace Engineering, Civil and Environmental Engineering, Earth Sciences, Electrical and Computer Engineering, Engineering, Geology, Geophysics and Seismology, Glaciology, Mining Engineering, Other Engineering, Physical Sciences and Mathematics, Physics, Tectonics and Structure, Volcanology
Advanced Land Observing Satellite-2 (ALOS-2) is designed to routinely acquire both scanning synthetic aperture radar (ScanSAR) and stripmap data. In this paper, we present a special multiband bandpass filter (MBF) to remove azimuth nonoverlap spectra for the interferometric processing of ALOS-2 full-aperture ScanSAR product. As required by the MBF, we estimate the important ScanSAR system [...]
InSAR Time Series Analysis of L-band Wide- Swath SAR Data Acquired by ALOS-2
Published: 2020-04-12
Subjects: Aerospace Engineering, Civil and Environmental Engineering, Earth Sciences, Electrical and Computer Engineering, Engineering, Environmental Sciences, Geology, Geomorphology, Geophysics and Seismology, Glaciology, Hydrology, Mining Engineering, Other Earth Sciences, Physical Sciences and Mathematics, Tectonics and Structure, Volcanology
Operating at L-band (~24 cm wavelength) in wide-swath modes is one of the characteristics of the new and next generation satellite synthetic aperture radar (SAR) missions. After 3 years of operation, the Japan Aerospace Exploration Agency Advanced Land Observing Satellite-2 (ALOS-2) satellite has acquired a wealth of L-band wide-swath SAR data over many areas using its ScanSAR mode. We present [...]
Measuring Azimuth Deformation With L-Band ALOS-2 ScanSAR Interferometry
Published: 2020-04-06
Subjects: Aerospace Engineering, Civil and Environmental Engineering, Computational Engineering, Computer Engineering, Earth Sciences, Electrical and Computer Engineering, Engineering, Geology, Geomorphology, Geophysics and Seismology, Glaciology, Hydrology, Mining Engineering, Other Earth Sciences, Physical Sciences and Mathematics, Signal Processing, Tectonics and Structure, Volcanology
We analyze the methods for measuring azimuth deformation with the L-band Advanced Land Observing Satellite-2 (ALOS-2) scanning synthetic aperture radar (ScanSAR) interferometry. To implement the methods, we extract focused bursts from the ALOS-2 full-aperture product, which is the only product available for ScanSAR interferometry at present. The extracted bursts are properly processed to measure [...]
Estimating Azimuth Offset With Double-Difference Interferometric Phase: The Effect of Azimuth FM Rate Error in Focusing
Published: 2020-04-06
Subjects: Aerospace Engineering, Civil and Environmental Engineering, Earth Sciences, Electrical and Computer Engineering, Engineering, Environmental Sciences, Geology, Geomorphology, Geophysics and Seismology, Glaciology, Hydrology, Mining Engineering, Other Earth Sciences, Physical Sciences and Mathematics, Physics, Tectonics and Structure, Volcanology
Estimating azimuth offset with double-difference interferometric (DDI) phase, which is called multiple-aperture interferometric synthetic aperture radar (InSAR) or spectral diversity, is increasingly used in recent years to measure azimuth deformation or to accurately coregister a pair of InSAR images. We analyze the effect of frequency modulation (FM) rate error in focusing on the DDI phase with [...]